Peers & Trunks

Asterisk Users and Peers

Here is a list of my current VSP settings. Since installing Asterisk 1.6.x I have found that my peers and trunk configuration had to be changed.

Asterisk 1.6.x

Templates

[exten-set](!) type=friend qualify=yes port=5060 callgroup=1 pickupgroup=1 host=dynamic dtmfmode=rfc2833 canreinvite=no context=internal

[lan-codec](!) disallow=all allow=ulaw [wan-codec](!) disallow=all allow=g729

SIP Configuration

GoTalk

	Peer		User
	;GoTalk Outbound [GoTalk](wan-codec) defaultuser=username fromuser=username type=peer secret=password qualify=yes host=sip.gotalk.com ;insecure=very dtmfmode=rfc2833		;GoTalk Inbound [username](wan-codec) defaultuser=username type=user secret=password context=from-vsp canredirect=no
	Registration
	register=username:[email protected]/username
	NOTE: Username is not your DID but you GoTalk 09 number. Also the DTMF settings on an ATA or IP Phone should be set to AVT

PennyTel

	Peer		User
	;PennyTel Outbound [PennyTel](wan-codec) defaultuser=username type=peer secret=password qualify=yes ;insecure=very host=sip.pennytel.com canreinvite=no canredirect=no		;PennyTel Inbound [username](wan-codec) defaultuser=username type=user secret=secret ;fromuser=username context=from-vsp canredirect=no canreinvite=no context=from-vsp
	Registration
	register=username:[email protected]/username

BBPGlobal

	Peer		User
	[BBPGlobal](wan-codec) defaultuser=username secret=password type=peer call-limit=1 qualify=yes maxexpiry=3600 ;insecure=very host=sip2.bbpglobal.com fromuser=username fromdomain=sip2.bbpglobal.com authuser=username		;BBP Global inbound [1104848](wan-codec) defaultuser=username type=user secret=password ;insecure=very fromuser=username context=from-vsp
	Registration
	register=username:[email protected]/username

Free World Dialpoint

	Peer		User
	[WorldDialPoint](wan-codec) defaultuser=username type=peer secret=password qualify=yes host=202.168.56.133		;;Free World Dial Inbound [username](wan-codec) defaultuser=username type=user secret=password ;insecure=very fromuser=username context=from-vsp canreinvite=no
	Registration
	register=username:[email protected]

MyNetFone

	Peer		User
	;MyNetFone Outbound [MyNetFone](wan-codec) type=friend secret=password defaultuser=username fromuser=username host=sip.myfone.com.au qualify=yes dtmfmode=rfc2833 canreinvite=no		[;MyNetFone Inbound [username](wan-codec) type=username secret=password defaultuser=password nat=yes dtmfmode=rfc2833 canreinvite=no context=from-vsp
	Registration
	register=09xxxxxx:[email protected]/09xxxxxx

For some reason MNF will only operate as a type=friend rather than setting an inbound and outbound context.

fwdOUT

	Peer & User
	[fwdOUT] type=friend username=username secret=password host=iax.fwdOUT.com context=fromfwdOUT auth=rsa inkeys=freeworlddialup disallow=all allow=ilbc allow=ulaw
	Registration
	register=username:[email protected]
	[internal] ;fwdOUT exten => _01X.,1,Set(CALLERID(all)="Klaverstyn" <6173???????>) exten => _01X.,n,Dial(IAX2/username@fwdOUT/${EXTEN:2},60) exten => _01X.,n,Congestion [fromfwdOUT] exten => _61[2378]XXXXXXXX,1,Dial(SIP/GoTalk/0${EXTEN:2},60) exten => _61[2378]XXXXXXXX,n,HangUp exten => _614XXXXXXXX,1,Dial(SIP/GoTalk/0${EXTEN:2},60L(1800000:1790000)) exten => _614XXXXXXXX,n,HangUp exten => _611800XXXXXX,1,Dial(SIP/GoTalk/${EXTEN:2},60) exten => _611800XXXXXX,n,HangUp

Asterisk 1.4.x

IAX Configuration

FWD (Free World Dialup)

	Peer		User
	[fwd] CallerID="David" <username> username=username type=peer secret=password qualify=yes host=iax2.fwdnet.net disallow=all allow=ulaw auth=md5		[iaxfwd] username=username secret=password type=user auth=rsa inkeys=freeworlddialup context=from-vsp
	Registration
	register=username:[email protected]

SIP Configuration

GoTalk

	Peer		User
	[GoTalk] username=username fromuser=username type=peer secret=password qualify=yes host=sip.gotalk.com disallow=all allow=g729 insecure=very dtmfmode=rfc2833		;GoTalk Inbound [username] username=username type=user secret=password context=from-vsp canredirect=no
	Registration
	register=username:[email protected]/username
	NOTE: Username is not your DID but you GoTalk 09 number. Also the DTMF settings on an ATA or IP Phone should be set to AVT

PennyTel

	Peer		User
	[PennyTel] username=username type=peer secret=password qualify=yes insecure=very host=sip.pennytel.com disallow=all canreinvite=no canredirect=no allow=g729		;PennyTel Inbound [username] username=username type=user secret=password fromuser=username context=from-vsp canredirect=no
	Registration
	register=username:[email protected]/username

BBPGlobal

	Peer		User
	[BBPGlobal] username=username secret=password type=peer call-limit=1 qualify=yes maxexpiry=3600 insecure=very host=sip2.bbpglobal.com fromuser=username fromdomain=sip2.bbpglobal.com disallow=all allow=g729 authuser=password		;BBP Global inbound [username] username=username type=user secret=password insecure=very fromuser=username context=from-vsp
	Registration
	register=username:[email protected]/username

Free World Dialpoint

	Peer		User
	[WorldDialPoint] username=username type=peer secret=password qualify=yes host=202.168.56.133 disallow=all allow=g729		;Wold Dial Point Inbound [username] username=username type=user secret=password insecure=very fromuser=username context=from-vsp canreinvite=no
	Registration
	register=username:[email protected]

MyNetFone

	Peer & User
	[MyNetFone] type=friend secret=yyyyyyyy username=09xxxxxx fromuser=09xxxxxx authname=09xxxxxx host=sip.myfone.com.au insecure=very nat=yes disallow=all allow=g729 qualify=yes dtmfmode=rfc2833 canreinvite=no context=from-vsp
	Registration
	register=09xxxxxx:[email protected]/09xxxxxx

For some reason MNF will only operate as a type=friend rather than setting an inbound and outbound context.

fwdOUT

	Peer & User
	[fwdOUT] type=friend username=16121 secret=22IxVZq7obU2 host=iax.fwdOUT.com context=fromfwdOUT auth=rsa inkeys=freeworlddialup disallow=all allow=ilbc allow=ulaw
	Registration
	register=username:[email protected]