Reboot Polycom

From Asterisk

If you would even like to reboot a Polycom phone from the Asterisk CLI you need to configure 2 files.

The first file been the Polycom sip.cfg (or other) file.

voIpProt.SIP.specialEvent.checkSync.alwaysReboot=1

Make sure the Polycom is rebooted so the phone is reloaded with the new configurion file.

The second file been the Asterisk sip_notify.conf file.

/etc/asterisk/sip_notify.conf

[polycom-check-cfg] 
Event=>check-sync 
Content-Length=>0 

Reload the Asterisk SIP modules so Asterisk sees the changes in the file sip_notify.conf

sip reload

To execute the reboot from the Asterisk CLI type in:

sip notify polycom-check-cfg extension_number

From Handset

For the key combination, press and hold certain key combinations (depending on the phone model) simultaneously until a confirmation tone is heard or for about three seconds:

• IP 32x/33x: Volume-, Volume+, Hold, and Hands-free
• IP 430: Volume-, Volume+, Hold, and Messages
• IP 450, 550, 560, 600, 601, and 650, and 670: Volume-, Volume+, Mute, and Messages
• IP 6000: *, #, Volume+, and Select
• IP 7000: *, #, Volume-, and Volume+
• VVX 1500: Delete, Volume-, Volume+, and Select