Static IP Address for Raspbian: Difference between revisions

From KlavoWiki
Jump to navigationJump to search
Line 57: Line 57:
network 192.168.22.0
network 192.168.22.0
broadcast 192.168.22.255
broadcast 192.168.22.255
auto eth0:0


allow-hotplug wlan0
allow-hotplug wlan0

Revision as of 03:32, 9 January 2014

Static IP Address

To create a static IP address for Raspbian.

vi /etc/network/interfaces

Change the line

iface eth0 inet dhcp

to

iface eth0 inet static

and add the following lines immediately after the line above otherwise adding the lines to the end of the file will assign the information to the wireless network wlan0.

address 192.168.1.1
netmask 255.255.255.0
network 192.168.1.0
broadcast 192.168.1.255
gateway 192.168.1.254

Add an IP Alias

iface eth0:0 inet static
address 192.168.22.1
netmask 255.255.255.0
network 192.168.22.0
broadcast 192.168.22.255

Temporary Alias

To create a temporary alias rather than a permanent one you can issue the following command from the CLI.

ifconfig eth0:0 192.168.22.1/24

Config Example

Here is an example of my config file.

auto lo
iface lo inet loopback

iface eth0 inet static
address 192.168.13.252
netmask 255.255.255.0
network 192.168.13.0
broadcast 192.168.13.255
gateway 192.168.13.254

iface eth0:0 inet static
address 192.168.22.1
netmask 255.255.255.0
network 192.168.22.0
broadcast 192.168.22.255
auto eth0:0

allow-hotplug wlan0
iface wlan0 inet manual
wpa-roam /etc/wpa_supplicant/wpa_supplicant.conf
iface default inet dhcp