Raspberry Pi B+ USB Power

From KlavoWiki
Revision as of 09:54, 20 August 2016 by David (Sọ̀rọ̀ | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search

The Raspberry Pi B+ and the Raspberry Pi 2 B+ by default is not configured to power a 2.5 inch self powering USB hard disk. By default the USB ports on the B+ and 2 B+ only allow USB power for about 400mA. A USB hard disks uses 600mA at a minimum.

To increase the USB power to 1.2 amps 

vi /boot/config.txt

add the line 

max_usb_current=1

I believe this changes the gpio pin 38 value from 0 to 1 which opens a second resistor in parallel allowing for higher amperage over USB.

NOTE: A Raspberry Pi 3 uses 1.2 amps by default on the USB ports and does not require this setting.

Retrieved from ‘https://klaverstyn.com.au/david/wiki/index.php?title=Raspberry_Pi_B%2B_USB_Power&oldid=2101’