PVOutput with the Raspberry Pi and SolarRiver Inverters
This was a lot simpler to what I was expecting. many thanks for all those that have posted their steps for pvoutput and the Raspberry Pi.
raspbian
Download, write image to SD card and boot.
Hardware
Wireless USB Key
If required you can use a wireless USB key which I have working with Raspbian. Just plug and play. $8.85 from ebay.
USB to RS232 Serial DB9
As the Raspberry Pi does not have any Serial ports I purchased the following USB to RS232 Serial DB9 Adapter Cable from eBay for $12.99 each. These are also plug and play.
Install PVOutput
Download and extract pvoutput.tar.gz
I have modified the pvoutput perl file to also include the inverters voltage which was previously not logging.
This will extract files to:
- /opt
- /opt/solar
I have 2 inverts so under /opt/solar I have 2 folders called 2kw and 3kw separating the 2 inverters.
Install Prerequisite
apt-get install libdevice-serialport-perl libappconfig-perl libwww-perl
Edit pvoutput
On lines 59, 60 and 61 enter the details of your pvoutput account.
SERIAL_NUM => "S22123T486", API_KEY => "a84af5efb4ea4daa0dccd4f0a7c27ec31c194a8c", SYSTEM_ID => "12345",
cron
I have a bash file that creates cron entries so everything runs. Based on South East Queensland time the scripts will create 2 cron entries for sunrise to start the monitoring of the inverters. Once the inverters power off of an afternoon the inverter.pl scripts will try to contact the inverters for 5 attempts with a minute retry before terminating.
Run the following command to setup the cron entires.
/opt/solar-cron-setup.php
Sunrise
Edit the file paying attention to...
SUNFUNCS_RET_STRING, -27.34, 151.56, 90, 10
The is the longitude and latitude, specifically -27.34 and 151.56 which calculates the sunrise times for that area. As I'm located in Brisbane I have chosen Toowoomba for the sunrise times to allow for 1-2 minutes after the sun rises in Brisbane so I know the inverts would have powered on before the scripts runs. If the script runs and the inverters are not powered on the scripts will try to connect 5 times with a minute wait between retries.
If for some reason the inverters still have not powered on there is another script called solar-check.sh which is setup in cron to run at 5:30am at 7:00am to run the inverter.pl script if they are not already running.
Logging to MySQL
Create Table
CREATE TABLE testme (
DATE DATETIME NOT NULL default '0000-00-00 00:00:00',
TEMP FLOAT(3,1),
VPV FLOAT(4,1),
IAC FLOAT(3,1),
VAC FLOAT(4,1),
FAC FLOAT(4,2),
PAC INT(4) NOT NULL default '0',
ETOTAL FLOAT(10,1),
HTOTAL INT,
MODE INT(3),
ETODAY FLOAT(4,2) NOT NULL default '0.00',
PRIMARY KEY (DATE),
KEY PAC (PAC)
) ENGINE=InnoDB DEFAULT CHARSET=latin1;
Modify inverter.pl
Under the section
# Request Inverter Data (regular data poll) . . &writeToFile();
add
#
# Write data to MySQL
#
use POSIX qw(strftime);
my $date = strftime "%Y-%m-%d %H:%M:%S", localtime;
my $pac = $HoH{PAC}{VALUE};
if ($pac gt 0) {
print "Logging to: MySQL\n";
my $etotal = ($HoH{ETOTALL}{VALUE} + $HoH{ETOTALH}{VALUE});
my $htotal = ($HoH{HTOTALL}{VALUE} + $HoH{HTOTALH}{VALUE});
my $temp = $HoH{TEMP}{VALUE};
my $vpv = $HoH{VPV1}{VALUE};
my $iac = $HoH{IAC}{VALUE};
my $vac = $HoH{VAC}{VALUE};
my $fac = $HoH{FAC}{VALUE};
my $mode = $HoH{MODE}{VALUE};
my $etoday = $HoH{ETODAY}{VALUE};
use DBI;
my $dsn = "DBI:mysql:solar";
my $username = "root";
my $password = "";
my $table = "2kw";
my $dbh = DBI->connect($dsn,$username,$password);
$dbh->do("INSERT INTO $table VALUES ('$date', $temp, $vpv, $iac, $vac, $fac, $pac, $etotal, $htotal, $mode, $etoday)");
$dbh->disconnect();
}
Once I get some web pages created to view the local data from MySQL I will attach here.
