Windows Router: Difference between revisions
New page: A cheap and easy way of adding a router to your network is to use a surplus PC with Windows XP Professional installed on it. Just install an additional network card in the box and then con... |
No edit summary |
||
| Line 12: | Line 12: | ||
After doing this, reboot the machine. You may also need to disable Windows Firewall on the machine. | After doing this, reboot the machine. You may also need to disable Windows Firewall on the machine. | ||
As an alternative to the above you can save the following information to a text file with an extension of .reg. You can then double click the file to make the system change the requird information. | |||
<pre> | |||
Windows Registry Editor Version 5.00 | |||
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters] | |||
"IPEnableRouter"=dword:00000001 | |||
</pre> | |||
[[Category : Windows XP]] | [[Category : Windows XP]] | ||
Revision as of 12:46, 7 July 2008
A cheap and easy way of adding a router to your network is to use a surplus PC with Windows XP Professional installed on it. Just install an additional network card in the box and then configure the registry setting below and Presto! Your XP box becomes able to route (forward) IP packets from one interface to another.
Open Regedit and navigate to:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters
Find the following registry value:
IPEnableRouter
Set this value to 1 to enable IP routing on the box.
After doing this, reboot the machine. You may also need to disable Windows Firewall on the machine.
As an alternative to the above you can save the following information to a text file with an extension of .reg. You can then double click the file to make the system change the requird information.
Windows Registry Editor Version 5.00 [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters] "IPEnableRouter"=dword:00000001
