Static IP Address for Raspbian: Difference between revisions
From KlavoWiki
Jump to navigationJump to search
Line 31: | Line 31: | ||
network 192.168.22.0 | network 192.168.22.0 | ||
broadcast 192.168.22.255 | broadcast 192.168.22.255 | ||
auto eth0:0 | |||
</pre> | </pre> | ||
Revision as of 03:32, 9 January 2014
Static IP Address
To create a static IP address for Raspbian.
vi /etc/network/interfaces
Change the line
iface eth0 inet dhcp
to
iface eth0 inet static
and add the following lines immediately after the line above otherwise adding the lines to the end of the file will assign the information to the wireless network wlan0.
address 192.168.1.1 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 gateway 192.168.1.254
Add an IP Alias
iface eth0:0 inet static address 192.168.22.1 netmask 255.255.255.0 network 192.168.22.0 broadcast 192.168.22.255 auto eth0:0
Temporary Alias
To create a temporary alias rather than a permanent one you can issue the following command from the CLI.
ifconfig eth0:0 192.168.22.1/24
Config Example
Here is an example of my config file.
auto lo iface lo inet loopback iface eth0 inet static address 192.168.13.252 netmask 255.255.255.0 network 192.168.13.0 broadcast 192.168.13.255 gateway 192.168.13.254 iface eth0:0 inet static address 192.168.22.1 netmask 255.255.255.0 network 192.168.22.0 broadcast 192.168.22.255 auto eth0:0 allow-hotplug wlan0 iface wlan0 inet manual wpa-roam /etc/wpa_supplicant/wpa_supplicant.conf iface default inet dhcp