Static IP Address for Raspbian: Difference between revisions
From KlavoWiki
Jump to navigationJump to search
No edit summary |
|||
| Line 73: | Line 73: | ||
<pre> | <pre> | ||
static domain_name_servers=2001:4860:4860::8888 2001:4860:4860::8844 | static domain_name_servers=2001:4860:4860::8888 2001:4860:4860::8844 | ||
</pre> | |||
= VLAN = | |||
== Load 8021q Module == | |||
<pre> | |||
vi /etc/modules | |||
</pre> | |||
Add the line | |||
<pre> | |||
8021q | |||
</pre> | |||
== Create Interface == | |||
Define a VLAN for a specific interface. | |||
<pre> | |||
vi /etc/network/interfaces | |||
</pre> | |||
<pre> | |||
# VLAN 101 Interface | |||
auto eth0.101 | |||
iface eth0.101 inet manual | |||
vlan-raw-device eth0 | |||
</pre> | |||
== Assign IP Address == | |||
Set a static IP for new interface | |||
<pre> | |||
vi /etc/dhcpcd.conf | |||
</pre> | |||
<pre> | |||
# Static IP configuration for VLan.10 | |||
interface eth0.101 | |||
static ip_address=192.168.1.101/24 | |||
</pre> | </pre> | ||
[[Category : Raspbian]] | [[Category : Raspbian]] | ||
Revision as of 00:00, 23 November 2018
interfaces
make sure the interfaces file has not been modified.
vi /etc/network/interfaces
The default settings are:
# interfaces(5) file used by ifup(8) and ifdown(8)
# Please note that this file is written to be used with dhcpcd
# For static IP, consult /etc/dhcpcd.conf and 'man dhcpcd.conf'
# Include files from /etc/network/interfaces.d:
source-directory /etc/network/interfaces.d
auto lo
iface lo inet loopback
iface eth0 inet manual
allow-hotplug wlan0
iface wlan0 inet manual
wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf
allow-hotplug wlan1
iface wlan1 inet manual
wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf
dhcpcd.conf
vi /etc/dhcpcd.conf
Append the following. The entry of static will stop the server looking for an IP address from DHCP.
interface eth0 static ip_address=192.168.13.200/24 static routers=192.168.13.1 static domain_name_servers=8.8.8.8 8.8.4.4 static domain_search=mydomain.com ap.mydomain.com
Alias
Temporary
To create a temporary alias rather than a permanent one you can issue the following command from the CLI.
ifconfig eth0:0 192.168.22.1/24
IPv6
I haven't figured out a way for this to work with configuration file dhcpcd.conf.
vi /etc/network/interfaces
auto eth0 iface eth0 inet6 static address 2321:3fa4:4f7a:d100::1234 netmask 56 gateway 2321:3fa4:4f7a:d100::ffff
Edit dhcpcd.conf for name servers
vi /etc/dhcpcd.conf
static domain_name_servers=2001:4860:4860::8888 2001:4860:4860::8844
VLAN
Load 8021q Module
vi /etc/modules
Add the line
8021q
Create Interface
Define a VLAN for a specific interface.
vi /etc/network/interfaces
# VLAN 101 Interface
auto eth0.101
iface eth0.101 inet manual
vlan-raw-device eth0
Assign IP Address
Set a static IP for new interface
vi /etc/dhcpcd.conf
# Static IP configuration for VLan.10 interface eth0.101 static ip_address=192.168.1.101/24
