Raspberry Pi B+ USB Power: Difference between revisions
From KlavoWiki
Jump to navigationJump to search
Created page with "It seems that the Raspberry Pi B+ by default is not configured to power a 2.5 inch self powering USB hard disk. By default it seems that the USB ports on the B+ only allow US..." |
No edit summary |
||
| Line 1: | Line 1: | ||
The Raspberry Pi B+ and the Raspberry Pi 2 B+ by default is not configured to power a 2.5 inch self powering USB hard disk. By default the USB ports on the B+ and 2 B+ only allow USB power for about 400mA. A USB hard disks uses 600mA at a minimum. | |||
To increase the USB power to 1.2 amps | To increase the USB power to 1.2 amps | ||
Revision as of 11:15, 10 March 2015
The Raspberry Pi B+ and the Raspberry Pi 2 B+ by default is not configured to power a 2.5 inch self powering USB hard disk. By default the USB ports on the B+ and 2 B+ only allow USB power for about 400mA. A USB hard disks uses 600mA at a minimum.
To increase the USB power to 1.2 amps
vi /boot/config.txt
add the line
max_usb_current=1
I believe this changes the gpio pin 38 value from 0 to 1 which opens a second resistor in parallel allowing for higher amperage over USB.
