Wi-Fi for Raspbian: Difference between revisions
From KlavoWiki
Jump to navigationJump to search
Created page with "Check if Raspbian can see the USB device. <pre> lsusb </pre> the result should be something like <pre> Bus 001 Device 002: ID 0424:9512 Standard Microsystems Corp. Bus 001 De..." |
No edit summary |
||
Line 46: | Line 46: | ||
Here is a reference for my configuration<br> | Here is a reference for my configuration<br> | ||
'''wpa_supplicant.conf''' | /etc/wpa_supplicant/'''wpa_supplicant.conf''' | ||
<pre> | <pre> | ||
ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev | ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev |
Revision as of 09:08, 9 August 2014
Check if Raspbian can see the USB device.
lsusb
the result should be something like
Bus 001 Device 002: ID 0424:9512 Standard Microsystems Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. Bus 001 Device 004: ID 0bda:8176 Realtek Semiconductor Corp. RTL8188CUS 802.11n WLAN Adapter Bus 001 Device 005: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB Bus 001 Device 006: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB Bus 001 Device 007: ID 4971:1020 SimpleTech
You can see my Wi-Fi device as device number 004.
Run the following commands
wpa_cli
from within this cli use the following commands
To view the current SSID's within range
scan scan results
Configure the required SSID
add network set_network 0 ssid "ssid-name" set_network 0 psk "psk-password" enable_network 0 save_config quit
Check for configuration
iwconfig
By default the interface will use DHCP to get an IP address. If you wish to assign a static IP address to wlan0 refer to Static_IP_Address_for_Raspbian
Here is a reference for my configuration
/etc/wpa_supplicant/wpa_supplicant.conf
ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev update_config=1 network={ ssid="ssid-name" psk="psk-password" }