Asterisk for Raspberry Pi on ArchLinux: Difference between revisions

From KlavoWiki
Jump to navigationJump to search
← Older edit
 
(97 intermediate revisions by the same user not shown)
Line 1: Line 1:
If you don't want to follow these instructions and would prefer to download an image you can do so by downloading the image from [[Asterisk for Raspberry Pi Image]].
If you don't want to follow these instructions and would prefer to download an image you can do so by downloading the image from [[Asterisk for Raspberry Pi Image]].


The following instructions are based on Arch Linux ARM (archlinux-hf-2012-09-18.zip)
The following instructions are based on Arch Linux ARM (archlinux-hf-2013-07-22.img.zip)


= Write Image to SD Card =
= Write Image to SD Card =
Line 7: Line 7:


Once the image is written insert the SD card into the Raspberry Pi and boot.  The device will get an IP address from DHCP.
Once the image is written insert the SD card into the Raspberry Pi and boot.  The device will get an IP address from DHCP.
= Update OS =
<pre>
pacman-key --init
pacman -Syu --noconfirm
reboot
</pre>
= Utilities =
Install utilities to help with setup/administration
<pre>
pacman -S --noconfirm vim mlocate zip unzip
</pre>
== vi to vim ==
<pre>
pacman -R --noconfirm vi
ln -s /usr/bin/vim /usr/bin/vi
</pre>
== Create ll alias ==
<pre>
vi /root/.profile
</pre>
Add the following line
<pre>
alias ll="ls -la --color --group-directories-first --time-style=\"+%Y-%m-%d %H:%M\""
</pre>
= Time Synchronisation =
<pre>
cp -f /usr/share/zoneinfo/Australia/Brisbane /etc/localtime
</pre>
= Set IP Address =
<pre>
vi /boot/cmdline.txt
</pre>
Add the following text.  Make sure there is no carriage return at the end of the file and that everything is located on one line
<pre>
ip=192.168.1.11::192.168.1.254:255.255.255.0:rpi:eth0:off
</pre>
Set DNS Servers, DNS suffix and DNS search.
<pre>
vi /etc/resolv.conf
</pre>
add the lines
<pre>
domain mydomain.com
search mydomain.com
nameserver 192.168.1.254
</pre>
After reboot check network settings
<pre>
ip addr show dev eth0
</pre>
other useful commands
<pre>
ip addr add 192.168.17.250/24 dev eth0
ip route add 192.168.0.0/16 via 192.168.25.253 dev eth0
ip addr delete 192.168.17.250/24 dev eth0
ip route delete 192.168.0.0/16 via 192.168.25.253 dev eth0
</pre>


= Expand Partition =
= Expand Partition =
Line 36: Line 107:
I would recommend allocating the size of the swap file to be that equal to the RAM size.
I would recommend allocating the size of the swap file to be that equal to the RAM size.
<pre>
<pre>
fallocate -l 256M /swapfile
fallocate -l 512M /swapfile
chmod 600 /swapfile
chmod 600 /swapfile
mkswap /swapfile
mkswap /swapfile
Line 51: Line 122:
</pre>
</pre>


= Update OS =
= Enable Sound Card =
<pre>
<pre>
pacman -Syu
vi /etc/rc.conf
reboot
</pre>
</pre>


= Utilities =
add the line
Install utilities to help with setup/administration
<pre>
pacman -S initscripts vim mlocate zip unzip
</pre>


== vi to vim ==
<pre>
<pre>
pacman -R vi
MODULES=(snd-bcm2835)
ln -s /usr/bin/vim /usr/bin/vi
</pre>
 
== Create ll alias ==
<pre>
vi /root/.profile
</pre>
 
add the line
<pre>
alias ll="ls -la"
</pre>
</pre>


= Enable Sound Card =
<pre>
<pre>
vi /etc/rc.conf
pacman -S --noconfirm alsa-utils
</pre>
</pre>


add the line
Test with
 
<pre>
<pre>
MODULES=(snd-bcm2835)
aplay /usr/share/sounds/alsa/Front_Left.wav && aplay /usr/share/sounds/alsa/Front_Center.wav && aplay /usr/share/sounds/alsa/Front_Right.wav
</pre>
</pre>


= Regional settings =
= Regional settings =
Enable all AU and US entries, 4 lines
Enable AU or country specific entries.
<pre>
<pre>
vi /etc/locale.gen
vi /etc/locale.gen
Line 101: Line 153:
</pre>
</pre>


= Time Synchronisation =
= Hostname =
<pre>
<pre>
cp /usr/share/zoneinfo/Australia/Brisbane /etc/localtime
vi /etc/hostname
pacman -R openntpd
pacman -S ntp
ntpdate ntp.bri.connect.com.au
 
vi /etc/rc.conf
hwclock (remove)
ntpdate (add)
</pre>
</pre>


= Asterisk Packages =
Asterisk uses initscripts to start, stop and manage the asterisk service.  This causes a conflict with network and ntpdate.  We need to install initscripts but remove the networking and clock functions.
<pre>
<pre>
pacman -S --noconfirm initscripts
</pre>


= Hostname =
<pre>
<pre>
vi /etc/hostname
vi /etc/rc.conf
vi /etc/hosts
 
vi /etc/dhcpcd.conf
          add line: nohook resolv.conf
        remove line: nohook lookup-hostname
</pre>
</pre>
Remove '''ntpdate''', '''networking''' and '''sshd''' from DEAMONS=()
<br><br>


= Network =
Install prerequisites for Asterisk.
<pre>
vi /etc/conf.d/network
<pre>
add the lines
<pre>
interface=eth0
address=192.168.1.1
netmask=255.255.255.0
broadcast=192.168.0.255
gateway=192.168.1.254
<pre>
<pre>
pacman -S --noconfirm gcc make hgsvn libxml2 libnewt sqlite subversion mysql spandsp speex
systemctl enable mysqld.service
systemctl start mysqld.service
</pre>


== Secure mysql ==
<pre>
<pre>
vi /etc/systemd/system/network.service
/usr/bin/mysql_secure_installation
</pre>
</pre>
add the lines
<pre>
[Unit]
Description=Network Connectivity
Wants=network.target
Before=network.target


[Service]
= Install Asterisk =
Type=oneshot
Download and install Asterisk.  You can refer to [[Asterisk Install]] if required, but only Asterisk is required.
RemainAfterExit=yes
EnvironmentFile=/etc/conf.d/network
ExecStart=/sbin/ip link set dev ${interface} up
ExecStart=/sbin/ip addr add ${address}/${netmask} broadcast ${broadcast} dev ${interface}
ExecStart=/sbin/ip route add default via ${gateway}
ExecStop=/sbin/ip addr flush dev ${interface}
ExecStop=/sbin/ip link set dev ${interface} down


[Install]
WantedBy=multi-user.target
</pre>


== Set Asterisk to Automatic ==
<pre>
<pre>
systemctl disable dhcpcd@eth0.service
vi /etc/rc.conf
systemctl enable network.service
 
reboot
</pre>
</pre>
and add '''asterisk''' to DEAMONS


== logrotate ==
<pre>
<pre>
vi /etc/resolv.conf
/etc/logrotate.d/asterisk
</pre>
</pre>
add the lines
add the following lines to the file
<pre>
<pre>
domain mydomain.com
/var/log/asterisk/messages /var/log/asterisk/*log {
search mydomain.com
  missingok
nameserver 192.168.1.254
  notifempty
  rotate 12
  weekly
  create 0640 root root
  postrotate
      /usr/sbin/asterisk -rx 'logger reload' > /dev/null 2> /dev/null
  endscript
}
</pre>
</pre>


= Asterisk Packages =
== logger ==
<pre>
pacman -S gcc make hgsvn libxml2 libnewt sqlite subversion mysql spandsp speex
systemctl enable mysqld.service
systemctl start mysqld.service
<pre>
 
== Secure mysql ==
<pre>
<pre>
/usr/bin/mysql_secure_installation
vi /etc/asterisk/logger.conf
</pre>
</pre>
 
change from:
= Free Memory =
So Asterisk will compile we need to free as many applications as possible from memory
<pre>
<pre>
systemctl stop ntpd.service
;dateformat=%F %T
systemctl stop mysqld.service
</pre>to  
</pre>
 
= Install Asterisk =
Download and install Asterisk.  You can refer to [Asterisk Install] if required, but only Asterisk is required.
 
 
== Set Asterisk to Automatic ==
<pre>
<pre>
vi /etc/rc.conf
dateformat=%F %T %Z
</pre>
</pre>
and add asterisk to DEAMONS


= Sendmail =
= Sendmail =
<pre>
<pre>
pacman -R heirloom-mailx
pacman -R --noconfirm heirloom-mailx
rm /etc/mail.rc.pacsave
rm /etc/mail.rc.pacsave
pacman -S ssmtp
pacman -S --noconfirm ssmtp
</pre>
</pre>


Line 223: Line 237:
hostname=rpi.klaverstyn.com
hostname=rpi.klaverstyn.com
FromLineOverride=yes
FromLineOverride=yes
</pre>
Edit aliases if required
<pre>
vi /etc/ssmtp/revaliases
</pre>
</pre>


= Install Apache =
= Install Apache =
<pre>
<pre>
pacman -S apache php-apache php php-gd  
pacman -S --noconfirm apache php-apache php php-gd  
</pre>
</pre>


Line 252: Line 270:
extension=mysql.so
extension=mysql.so
</pre>
</pre>
Locate date.timezone and change accordingly.
<pre>
date.timezone = Australia/Brisbane
</pre>
For a list of [http://php.net/manual/en/timezones.php time zones]


<pre>
<pre>
Line 282: Line 307:
</pre>
</pre>


'''Note'''': The web root is /srv/http/
'''Note''': The web root is /srv/http/


= CDR =
Refer to the [[Cdr | Call Detail Records]] page which will allow Asterisk to write the CDR records to the database.
== aCDR ==
aCDR is a web appliction that allows you to search throught your CDR records. View the [[aCDR]] page on installation.


= Backup Script =
= Backup Script =
Refer to [Astetrisk Backup] for the script itself.
Refer to [[Asterisk Backup Shell Script]] for the script itself.
<pre>
<pre>
pacman -S smbclient
pacman -S --noconfirm smbclient
</pre>
</pre>


= perl =
= perl =
NOTE: To install the perl module requires more RAM that what is available on the 256MM model of the rPi.  Make sure you have a swap file otherwise this section will fail.
NOTE: To install the perl module requires more RAM that what is available on the 256MB model of the rPi.  Make sure you have a swap file otherwise this section will fail.
<pre>
<pre>
pacman -S perl cpan libyaml perl-yaml libyaml perl-libwww sox mpg123
pacman -S --noconfirm perl perl-yaml libyaml perl-libwww sox mpg123
</pre>
</pre>


== Text to Speech ==
== Text to Speech ==
<pre>
<pre>
perl -MCPAN -e "install Bundle::LWP"
PERL_MM_USE_DEFAULT=1 perl -MCPAN -e "install Bundle::LWP"
perl -MCPAN -e "install CGI::Util"
PERL_MM_USE_DEFAULT=1 perl -MCPAN -e "install CGI::Util"
</pre>
</pre>


Line 319: Line 348:
perl Makefile.PL
perl Makefile.PL
make install  
make install  
cd..
cd ..
</pre>
</pre>


<pre>
<pre>
perl -MCPAN -e "install Bundle::LWP"
PERL_MM_USE_DEFAULT=1 perl -MCPAN -e "install Bundle::LWP"
perl -MCPAN -e "install Proc::WaitStat"
PERL_MM_USE_DEFAULT=1 perl -MCPAN -e "install Proc::WaitStat"
perl -MCPAN -e "install MIME::Types"
PERL_MM_USE_DEFAULT=1 perl -MCPAN -e "install MIME::Types"
</pre>
</pre>


<pre>
wget http://www.klaverstyn.com.au/david/asterisk/files/fax2mail
mv fax2mail /usr/sbin/
chmod 755 /usr/sbin/fax2mail
mkdir /var/spool/asterisk/fax
</pre>


= Reference =
http://wiki.archlinux.org/index.php/Systemd<br>
http://wiki.archlinux.org/index.php/Configuring_Network<br>
http://wiki.archlinux.org/index.php/Beginners%27_Guide<br>
http://wiki.archlinux.org/index.php/LAMP#PHP<br>
http://raw.github.com/Evilpaul/RPi-config/master/config.txt




= Reference =
[[Category : ArchLinux]] [[Category : Asterisk]]  [[Category : Raspberry Pi]]
<pre>
https://wiki.archlinux.org/index.php/Systemd
https://wiki.archlinux.org/index.php/Configuring_Network
https://wiki.archlinux.org/index.php/Beginners%27_Guide
https://wiki.archlinux.org/index.php/LAMP#PHP
</pre>
 
[[Category : Asterisk]]  [[Category : Rasberry Pi]]

Latest revision as of 11:30, 12 March 2014

If you don't want to follow these instructions and would prefer to download an image you can do so by downloading the image from Asterisk for Raspberry Pi Image.

The following instructions are based on Arch Linux ARM (archlinux-hf-2013-07-22.img.zip)

Write Image to SD Card

Using Win32DiskImager and the latest version of Arch Linux ARM from Raspberry Pi write the image to the SD card.

Once the image is written insert the SD card into the Raspberry Pi and boot. The device will get an IP address from DHCP.

Update OS

pacman-key --init
pacman -Syu --noconfirm
reboot

Utilities

Install utilities to help with setup/administration 

pacman -S --noconfirm vim mlocate zip unzip

vi to vim

pacman -R --noconfirm vi
ln -s /usr/bin/vim /usr/bin/vi

Create ll alias

vi /root/.profile

Add the following line 

alias ll="ls -la --color --group-directories-first --time-style=\"+%Y-%m-%d %H:%M\""

Time Synchronisation

cp -f /usr/share/zoneinfo/Australia/Brisbane /etc/localtime

Set IP Address

vi /boot/cmdline.txt

Add the following text. Make sure there is no carriage return at the end of the file and that everything is located on one line 

ip=192.168.1.11::192.168.1.254:255.255.255.0:rpi:eth0:off

Set DNS Servers, DNS suffix and DNS search. 

vi /etc/resolv.conf

add the lines 

domain mydomain.com
search mydomain.com
nameserver 192.168.1.254

After reboot check network settings 

ip addr show dev eth0

other useful commands 

ip addr add 192.168.17.250/24 dev eth0
ip route add 192.168.0.0/16 via 192.168.25.253 dev eth0


ip addr delete 192.168.17.250/24 dev eth0
ip route delete 192.168.0.0/16 via 192.168.25.253 dev eth0

Expand Partition

Now that the device has booted log on and change the default partition from 2 GB to the maximum partition of your SD card. 

fdisk /dev/mmcblk0
d (delete)
2 (partition 2)
n (new)
p (primary partition)
2 (partition 2 as previously deleted)
enter (accept default start sector)
enter (accept default end sector)
w (write changes)

reboot

Once the rPi has rebooted 

resize2fs /dev/mmcblk0p2
reboot


Swap File

As the rPi has limited RAM, either 256 or 512 depending on your version we'll create a swap file to allow application to use higher memory if required.

I would recommend allocating the size of the swap file to be that equal to the RAM size. 

fallocate -l 512M /swapfile
chmod 600 /swapfile
mkswap /swapfile
swapon /swapfile

The swap file is now active. We now need to ensure that it is used at boot. 

vi /etc/fstab

add the line to the file 

/swapfile none swap defaults 0 0

Enable Sound Card

vi /etc/rc.conf

add the line 

MODULES=(snd-bcm2835)

pacman -S --noconfirm alsa-utils

Test with 

aplay /usr/share/sounds/alsa/Front_Left.wav && aplay /usr/share/sounds/alsa/Front_Center.wav && aplay /usr/share/sounds/alsa/Front_Right.wav

Regional settings

Enable AU or country specific entries. 

vi /etc/locale.gen

vi /etc/rc.conf
locale-gen

Hostname

vi /etc/hostname

Asterisk Packages

Asterisk uses initscripts to start, stop and manage the asterisk service. This causes a conflict with network and ntpdate. We need to install initscripts but remove the networking and clock functions. 

pacman -S --noconfirm initscripts 

vi /etc/rc.conf

Remove ntpdate, networking and sshd from DEAMONS=()

Install prerequisites for Asterisk. 

pacman -S --noconfirm gcc make hgsvn libxml2 libnewt sqlite subversion mysql spandsp speex
systemctl enable mysqld.service
systemctl start mysqld.service

Secure mysql

/usr/bin/mysql_secure_installation

Install Asterisk

Download and install Asterisk. You can refer to Asterisk Install if required, but only Asterisk is required.


Set Asterisk to Automatic

vi /etc/rc.conf

and add asterisk to DEAMONS

logrotate

/etc/logrotate.d/asterisk

add the following lines to the file 

/var/log/asterisk/messages /var/log/asterisk/*log {
   missingok
   notifempty
   rotate 12
   weekly
   create 0640 root root
   postrotate
       /usr/sbin/asterisk -rx 'logger reload' > /dev/null 2> /dev/null
   endscript
}

logger

vi /etc/asterisk/logger.conf

change from: 

;dateformat=%F %T

to 

dateformat=%F %T %Z

Sendmail

pacman -R --noconfirm heirloom-mailx
rm /etc/mail.rc.pacsave
pacman -S --noconfirm ssmtp

vi /etc/ssmtp/ssmtp.conf

and add the lines 

mailhub=192.168.13.3
hostname=rpi.klaverstyn.com
FromLineOverride=yes

Edit aliases if required 

vi /etc/ssmtp/revaliases

Install Apache

pacman -S --noconfirm apache php-apache php php-gd 

vi /etc/httpd/conf/httpd.conf

and modify the following 

AllowOverride All
DirectoryIndex index.php index.html index.htm index.html.var

systemctl enable httpd.service

Configure php

vi /etc/php/php.ini

uncomment 

extension=mysqli.so
extension=mysql.so

Locate date.timezone and change accordingly. 

date.timezone = Australia/Brisbane

For a list of time zones 

vi /etc/httpd/conf/httpd.conf

add the following lines in thier respective sections 

LoadModule php5_module modules/libphp5.so
Include conf/extra/php5_module.conf
AddHandler application/x-httpd-php .php

uncomment the following lines 

TypesConfig conf/mime.types
MIMEMagicFile conf/magic

vi /etc/httpd/conf/mime.types

add the following line 

application/x-httpd-php5		php php5



systemctl start httpd.service

Note: The web root is /srv/http/

CDR

Refer to the Call Detail Records page which will allow Asterisk to write the CDR records to the database.

aCDR

aCDR is a web appliction that allows you to search throught your CDR records. View the aCDR page on installation.

Backup Script

Refer to Asterisk Backup Shell Script for the script itself. 

pacman -S --noconfirm smbclient

perl

NOTE: To install the perl module requires more RAM that what is available on the 256MB model of the rPi. Make sure you have a swap file otherwise this section will fail. 

pacman -S --noconfirm perl perl-yaml libyaml perl-libwww sox mpg123

Text to Speech

PERL_MM_USE_DEFAULT=1 perl -MCPAN -e "install Bundle::LWP"
PERL_MM_USE_DEFAULT=1 perl -MCPAN -e "install CGI::Util"

wget https://github.com/zaf/asterisk-googletts/blob/master/googletts.agi
mv googletts.agi /var/lib/asterisk/agi-bin/
chmod 755 /var/lib/asterisk/agi-bin/googletts.agi

fax2mail

cd /usr/src
wget http://search.cpan.org/CPAN/authors/id/R/RO/ROSCH/mime-construct-1.11.tar.gz
tar xzvf mime-construct-1.11.tar.gz
rm -f mime-construct-1.11.tar.gz
cd mime-construct-1.11
perl Makefile.PL
make install 
cd ..

PERL_MM_USE_DEFAULT=1 perl -MCPAN -e "install Bundle::LWP"
PERL_MM_USE_DEFAULT=1 perl -MCPAN -e "install Proc::WaitStat"
PERL_MM_USE_DEFAULT=1 perl -MCPAN -e "install MIME::Types"

wget http://www.klaverstyn.com.au/david/asterisk/files/fax2mail
mv fax2mail /usr/sbin/
chmod 755 /usr/sbin/fax2mail
mkdir /var/spool/asterisk/fax

Reference

http://wiki.archlinux.org/index.php/Systemd
http://wiki.archlinux.org/index.php/Configuring_Network
http://wiki.archlinux.org/index.php/Beginners%27_Guide
http://wiki.archlinux.org/index.php/LAMP#PHP
http://raw.github.com/Evilpaul/RPi-config/master/config.txt

Retrieved from ‘https://klaverstyn.com.au/david/wiki/index.php?title=Asterisk_for_Raspberry_Pi_on_ArchLinux&oldid=1585’